Abstract

Wire arc additive manufacturing (WAAM) of Mg–Al-RE alloy is an essential technology for producing high-quality large-scale components with high manufacturing flexibility. In this study, WAAM was utilized to fabricate a thin-wall component made of Mg-8.2Al-0.6Y-0.4Ce (AE81) alloy. The microstructure and tensile properties of the fabricated component were investigated. The results showed that the as-built AE81 alloy exhibits superior isotropic tensile strengths and a homogeneous equiaxed α-Mg grains structure. Additionally, the alloy demonstrated a minimal growth in grain size after high-temperature solid solution treatment due to the presence of thermally stable Al11/rare earth (RE)3 phases at grain boundaries. Further ageing treatment induces the formation of high-density of β-Mg17Al12 precipitates within the α-Mg grains, resulting in a considerable precipitation strengthening effect. Consequently, the heat-treated AE81 alloy demonstrated significantly enhanced tensile strength of 280 MPa and acceptable ductility of 4.6%. The results also revealed that the formation of equiaxed grains during WAAM contributed to the isotropic mechanical properties. These findings can facilitate advancements in AM processes and the development of high-performance Mg alloys.