Heterogeneous Fenton technology was employed for the advanced treatment of Maotai-flavored Baijiu wastewater. Novel catalysts were prepared by loading different active ingredients (Mn, Fe, and Cu) on γ-Al2O3 using an impregnation method. The effects of active ingredient, reaction time, initial pH, H2O2 dosage, catalyst dosage, and other factors on the reaction were examined. The properties of the new catalysts were analyzed using BET analysis, XPS, and SEM. Moreover, the mechanisms of Fenton-like oxidation and its reaction kinetics were explored through experiments and analyses including GC–MS and intermediate active species scavenging by tertiary butyl alcohol (TBA) and/or para-benzoquinone. The results revealed that the most effective removal of organic matter was achieved with a Mn-Fe/Al (2:1 wt%) catalyst dosage of 30 g/100 g water, pH of 5.0, H2O2 dosage of 0.3 g/L, and reaction time of 60 min; the effluent COD value was 12 ± 1 mg/L, and the degradation rate was 65.7 ± 3%, approximately 14% higher than that of the conventional Fenton catalyst under similar conditions; moreover, the catalytic efficacy remained high after seven cycles. Kinetic analysis indicated that the heterogeneous Fenton oxidation reaction followed a third-order kinetics model, with R2 = 0.9923 and K = 0.0006 min−1.

Development of a γ-Al2O3-Based Heterogeneous Fenton-like Catalyst and Its Application in the Advanced Treatment of Maotai-Flavored Baijiu Wastewater