The use of Fresnel lenses for solar energy concentration technology dates back to the 1950 s. These lenses feature a plano-convex optical design with a series of discontinuous convex grooves. Typically made from materials like polymethyl methacrylate, Fresnel lenses are lightweight, resistant to sunlight, thermally stable, and cost-effective. This study presents a novel Fresnel lens-based solar furnace configuration installed at the Eduardo Torroja Institute for Construction Science in Madrid, Spain. The novelty of this work lies in the exceptional performance and operability of the facility. Experimental characterization revealed a record peak irradiance over 7 MW m−2 for an incident target power exceeding 800 W. Comparison with ray tracing simulations shows good agreement with experimental results. This setup enables high temperature experiments up to 2000 °C with rapid execution times. A fixed receiver, a shutter system and a closed-loop heliostat tracking control system allow for flexible operation up to 5000 suns and straightforward maintenance. The concentrator element costs less than 300 USD (2022) m−2, offering an economical solution to solar-powered high concentration and temperature applications. This innovative design overcomes previous operational challenges, providing a robust and economical method for high-temperature material processing and other industrial applications.

Design solutions and characterization of a small scale and very high concentration solar furnace using a Fresnel lens