This study investigated the effects of aging treatments (200–500℃, 1 h) on the Cu-11.1Al-8.15Mn-0.37Si shape memory alloy manufactured using laser powder bed fusion (LPBF). As the aging temperature increased, the residual stress of the alloy decreased, and the microstructure transitioned from an austenite-martensite dual-phase structure to an austenite single-phase structure. A phenomenon of martensite stabilization induced by low-temperature aging at 200–300℃ was observed, leading to increased phase transformation temperatures and decreased mechanical properties. After aging at 400℃, the plasticity was improved and the shape memory effect (SME) recovery strain experienced a significant 48 % enhancement and reached a maximum value of 3.10 %. This enhancement was due to the improved ordering and texture homogenization of the austenite phase, confirmed by EBSD results. Meanwhile, EPMA analyses revealed the pinning effect of Mn5Si3 precipitations migrated from the grain interior to the grain boundaries which no longer obstructed the movement of martensitic habit planes during the recovery process. Thus, the SME improved. Additionally, after aging at 500℃, a large amount of α phase precipitated along grain boundaries leading to a decrease in mechanical properties. These findings underscore the importance of tailored aging treatments for optimizing shape memory properties in LPBF-manufactured Cu-based shape memory alloys.

Shape memory effect enhancement via aging treatment of the Cu-Al-Mn-Si alloy manufactured using laser powder bed fusion