Abstract Polyethersulfone (PES) is distinguished by its exceptional comprehensive properties, making it a highly valued engineering plastic employed in various cutting‐edge fields. However, the high cost of PES limits its wider application in industrial fields. Considering the cost‐reduction advantages of polymer foaming, PES foams were successfully prepared in this work using microcellular injection molding (MIM) and micro‐opening microcellular injection molding (MOMIM) foaming methods. Compared with the MIM foaming method, the PES foam samples prepared by the MOMIM foaming method have better microcellular structure and surface quality. As the micro‐opening distance increased, the cell density of the PES foam samples showed a gradual rise before plateauing, with the cell size remaining relatively constant. As a result, the density of the PES foam sample dropped to 1.07 g/cm 3 , which is 80.5% of the solid PES sample. Meanwhile, the mechanical properties of the PES foam samples remained robust, with both the specific flexural modulus and the specific flexural strength showing increases as the micro‐opening distance increased. The knowledge obtained from this study provides a method for preparing high‐performance PES foam materials, which will facilitate the application of PES in more civilian fields.

Fabrication of lightweight polyethersulfone foams with enhanced surface quality and high specific flexural properties using micro‐opening microcellular injection molding