Abstract

Across the world, nutraceuticals/dietary supplements are commonly consumed without medical supervision, and believing these products are harmless to health. However, these products may contain trace (TMs) and non-essential/heavy metals (nHMs) as contaminants at levels higher than the recommended daily allowance (RDA), which can be hazardous to human health. Consequently, it is crucial to assess the levels of these metals to ensure the safety of these products. This study aimed to analyze the concentration of TMs (Mn, Cu and Zn) and nHMs (Al, Cr, Ni, Cd and Pb) in nutraceuticals/dietary supplements. Metal analysis was conducted using inductively coupled plasma–optical emission spectrometry (ICP-OES). Multivariate and bivariate analysis including principle component analysis (PCA), hierarchical cluster analysis (HCA) and Pearson correlation coefficient (PCC) were applied to understand inter-metal association and sources of these metals. Concentration ranges for TMs were found as, Mn (0.2–4.3 mg/kg), Cu (0.11–2.54 mg/kg), and Zn (0.1–22.66 mg/kg) while the nHMs concentration ranges were: Al (0.046–3.336 mg/kg), Cr (0.11–1.63 mg/kg), Ni (0.18–0.72 mg/kg), Cd (0.04–0.92 mg/kg), and Pb (0.18–1.08 mg/kg). The levels of tolerable dietary intake (TDI) for Cr and Ni, and the provisional tolerable monthly intake (PTMI) limit for Cd, exceeded the values set by the World Health Organization (WHO) and the European Food Safety Authority (EFSA). The estimation of the target hazard quotient (THQ <1), hazard index (HI < 1) and cumulative cancer risk (CCR <1 ✕ 10−3) indicated no significant non-carcinogenic and carcinogenic health risks associated with consuming these products. Therefore, the primary recommendation from this study is to use the nutraceuticals/dietary supplements should be under the supervision of dietitian.