This article designs a strategy of introducing ultrafine precipitates into single‐phase microstructure to enhance Mg–6Zn alloy wire. Three combined processes including equal channel angular pressing (ECAP), direct extrusion, and multipass drawing are used to produce 0.3 mm‐diameter wire. The results show that an isothermal process of ECAP, extrusion, and drawing at 32 °C (named route B) produces a near‐fully solid solution microstructure and causes a very high elongation of 21% as well as an ultimate tensile strength of 24 MPa. Furthermore, on this basis, the addition of an aging treatment before drawing induces the precipitation of the Guinier–Preston zone in the near‐single‐phase Mg matrix and improves the tensile elongation to 28%, and the ultimate tensile strength also is increased to 290 MPa.

Enhanced Strength‐Ductility Synergy of Mg‐6Zn Alloy Wire by Inducing GP Zone Precipitation