Abstract

Abstract With the growing trend towards larger wind turbine rotor diameters, the impact of wind shear on rotor performance and loads becomes increasingly significant. Atmospheric stability strongly influences wind shear, leading to higher wind shear under stable atmospheric conditions. In this study, the aeroelastic performance of the IEA 22 MW rotor is assessed under inflow conditions generated by different methods. Inflow conditions were generated using turbulence models specified in the IEC Standards and also by Large Eddy simulations. Standalone OpenFAST simulations were conducted with the respective inflow conditions. It was found that at rated and above-rated wind speeds, the time-averaged wind turbine design loads were higher in stable atmospheric conditions, in comparison to the IEC NTM inflow conditions, while the opposite held for below-rated wind speeds. Specifically, the time-averaged root flapwise bending moment and rotor thrust were found to be higher by up to 7% in stable atmospheres. However, maximum design and fatigue loads were considerably higher in the IEC NTM case due to elevated turbulence levels. Compared to the IEC NTM case, the damage equivalent root flapwise bending moment was found to be 30% to 70% lower in the different scenarios.