Abstract

A novel polymer encapsulation strategy to synthesize metal isolated-single-atomic-site (ISAS) catalysts supported by porous nitrogen-doped carbon nanospheres is reported. First, metal precursors are encapsulated in situ by polymers through polymerization; then, metal ISASs are created within the polymer-derived p-CN nanospheres by controlled pyrolysis at high temperature (200-900 °C). Transmission electron microscopy and N2 sorption results reveal this material to exhibit a nanospheric morphology, a high surface area (≈380 m2 g-1 ), and a porous structure (with micropores and mesopores). Characterization by aberration-corrected high-angle annular dark-field scanning transmission electron microscopy and X-ray absorption fine structure confirms the metal to be present as metal ISASs. This methodology is applicable to both noble and nonprecious metals (M-ISAS/p-CN, M = Co, Ni, Cu, Mn, Pd, etc.). In particular, the Co-ISAS/p-CN nanospheres obtained using this method show comparable (E1/2 = 0.838 V) electrochemical oxygen reduction activity to commercial Pt/C with 20 wt% Pt loading (E1/2 = 0.834 V) in alkaline media, superior methanol tolerance, and outstanding stability, even after 5000 cycles.