Healthy Research Rewards
ResearchHub is incentivizing healthy research behavior. At this time, first authors of open access papers are eligible for rewards. Visit the publications tab to view your eligible publications.
Got it
KC
Kwok Chung
Author with expertise in Fiber-Reinforced Polymer Composites in Construction
Achievements
This user has not unlocked any achievements yet.
Key Stats
Upvotes received:
0
Publications:
6
(0% Open Access)
Cited by:
2
h-index:
36
/
i10-index:
85
Reputation
Biology
< 1%
Chemistry
< 1%
Economics
< 1%
Show more
How is this calculated?
Publications
0

Deterioration pattern of the axial compressive properties of steel-reinforced concrete columns owing to chloride salt erosion

Zhiquan Xing et al.May 30, 2024
The study of the durability of steel-reinforced concrete (SRC) columns under the influence of coastal moisture–heat coupling has grown in prominence. In this study, electrochemical corrosion and axial pressure loading tests were performed on 10 SRC columns. These tests studied the effects of varying corrosion rates and CL−concentration on the axial pressure performance of the SRC columns when conducted in an energized medium, and the results revealed the modes of failure and the degradation laws. The ultimate bearing capacity and stiffness of SRC columns increasingly deteriorate with increasing corrosion rate; the ductility index also deteriorates to certain extent. When the corrosion rate exceeds 20 %, each index parameter of the test column deteriorates. During the axial compression test, the concentration of CL−in the energized medium primarily increases the growth rate of strain in the elastic-plastic phase during the middle and late loading stages. This leads to further deterioration of the SRC columns in multiple ways, such as cracking of the protective layer of concrete, weakening of the material properties, and damage to the cross-section. Based on this experimental study, the modeling of SRC columns under chloride salt erosion was performed using a new finite-element method. In addition, the Mander constrained concrete model and the Biondini concrete cracking model were used to theoretically derive the ultimate bearing capacity of the corroded SRC column.
0
Paper
Citation1
0
Save
0

Low-Cycle Fatigue Behaviour of Stainless-Clad Bimetallic Steel Welded Connections

Xiaofeng Yang et al.Jun 6, 2024
The stainless-clad (SC) bimetallic steel is the most widely used laminated high-performance steel in construction, which often offers a variety of prominent structural performance and competitive advantages. Welding with electrodes of suitable mechanical properties and corrosion resistance is vital for SC bimetallic steel structures to ensure a complete corrosion-resistant surface. However, the research on welded connections under cyclic actions is very limited. Many recommendation designs and current standards for SC bimetallic steel are primarily developed for precision equipment, and they are not suitable for structural engineering. To this end, this paper aims to investigate the low-cycle fatigue behaviour of butt welded connections with different welding configurations for the SC bimetallic steel. Failure modes, cyclic characteristics and Masing behaviour of typical welded connections were analysed, and the low-cyclic fatigue behaviour was validated using the Basquin-Coffin-Manson model. A new proposed strain energy-based model was also proposed to describe. Differences in the low-cycle fatigue behaviour between the welded connections and the base bimetal were demonstrated, as well as that for various welding configurations. It was found that the low-cycle fatigue life of the welded connections with a transition weld zone is similar to that of these welded connections without a transition weld zone, both being about 60% to 80% of the base bimetal's fatigue life. However, the fatigue life of the welded connection with a single filler material is much shorter than that of the previous two, being only 15% to 30% of that of the base bimetal. It should be noted that both the adapted Basquin-Coffin-Manson model and the newly proposed strain energy-based model may predict well the low-cycle fatigue life of the three welded connections. Finally, the transition weld zone in these welded connections is recommended to be eliminated in order to simplify the welding procedures, and hence to improve welding efficiency.