Healthy Research Rewards
ResearchHub is incentivizing healthy research behavior. At this time, first authors of open access papers are eligible for rewards. Visit the publications tab to view your eligible publications.
Got it
AB
Ashok Bera
Author with expertise in Perovskite Solar Cell Technology
Achievements
Cited Author
Key Stats
Upvotes received:
0
Publications:
10
(20% Open Access)
Cited by:
1,484
h-index:
22
/
i10-index:
31
Reputation
Biology
< 1%
Chemistry
< 1%
Economics
< 1%
Show more
How is this calculated?
Publications
0

Large‐Area Perovskite Solar Cells with PTAA/Ag Combination: Performance Evaluation of the Solar Cell via SCAPS 1D Simulation

Naba Rana et al.Nov 22, 2024
Efficient and stable large‐area perovskite solar cells (PSCs) are essential for the translation of the technology. However, the fabrication of large‐area PSCs remains very challenging. Uniformity and homogeneity of different layers of a device over a large area are concerning issues. Poly[bis(4‐phenyl) (2,4,6‐trimethylphenyl) amine] (PTAA) has shown excellency as a hole transport layer (HTL) due to its stability and homogeneity over large areas. This work focuses on large‐area (2.0 cm 2 ) PSCs using PTAA as HTL with a device structure of FTO/m‐TiO 2 /RbCs(MAFA)PbI 3 /PTAA/Ag. This PSC yields a power conversion efficiency (PCE) of 9.35% and retains 72% of the initial PCE even after 2000 h of storage in ambient conditions, which is optimistic for the translation of the technology. The uniformity of the PTAA layer over the large area and proper band alignment at interfaces result in good performance of PSCs. A numerical model is studied for further optimization of this PSC. A large‐area monolithic tandem PSC is demonstrated using RbCs (MAFA)PbI 3 /PTAA combination along with a low bandgap perovskite, yielding a PCE of 21.85% with a V OC of 1.83 V, which is quite significant for an active area of 2 cm 2 . Therefore, this research will aid success in developing effective and stable large‐area PSCs.
0

Performance of ZnFe2O4 as a photoabsorber in solution-processed all-oxide planar photovoltaics

Parul Garg et al.Jun 10, 2024
Low-cost, stable, environment-friendly solar cells are the key aspects of modern-day photovoltaics, and oxide absorbers have become the focus of work towards stable devices. Here we explore the viability of semiconducting transition-metal spinel oxide $\mathrm{ZnF}{\mathrm{e}}_{2}{\mathrm{O}}_{4}$ (ZFO) as an absorber layer in solution-processed all-oxide planar solar cells. A 300 nm thick spin-coated ZFO shows a typical cubic spinel structure with a calculated band gap of 1.68 eV, as estimated from density functional theory. Absorption and emission spectra show a direct band gap of 2.19 eV with a maximum absorption coefficient of ${10}^{5}/\mathrm{cm}$, and the film shows a steady increase in photocurrent on illumination by white light. A conventional solution-grown $\mathrm{Ti}{\mathrm{O}}_{2}/\mathrm{ZFO}/\mathrm{NiO}$ all-oxide thin film heterojunction solar cell prepared on the fluorine-doped tin oxide coated glass substrate shows an open circuit voltage (${V}_{\mathrm{OC}}$) of 519 mV under air mass 1.5 solar illumination. Furthermore, upon doping the $\mathrm{Ti}{\mathrm{O}}_{2}$ layer with lithium, enhancement in recombination resistance and reduction of charge transfer resistance results in an increased ${V}_{\mathrm{OC}}$ of 640 mV. Our result introduces spinel oxide as a stable alternative for a photoabsorber in all-oxide photovoltaics, enhancing the multifunctionality of spinel ferrites.