Article16 August 2007free access Crystal structure of a Kir3.1-prokaryotic Kir channel chimera Motohiko Nishida Motohiko Nishida Laboratory of Molecular Neurobiology and Biophysics, Howard Hughes Medical Institute, Rockefeller University, New York, NY, USA Search for more papers by this author Martine Cadene Martine Cadene Laboratory of Mass Spectrometry and Gaseous Ion Chemistry, Rockefeller University, New York, NY, USAPresent address: Centre de Biophysique Moléculaire, CNRS, rue C Sadron, 45071 Orléans Cedex 2, France Search for more papers by this author Brian T Chait Brian T Chait Laboratory of Mass Spectrometry and Gaseous Ion Chemistry, Rockefeller University, New York, NY, USA Search for more papers by this author Roderick MacKinnon Corresponding Author Roderick MacKinnon Laboratory of Molecular Neurobiology and Biophysics, Howard Hughes Medical Institute, Rockefeller University, New York, NY, USA Search for more papers by this author Motohiko Nishida Motohiko Nishida Laboratory of Molecular Neurobiology and Biophysics, Howard Hughes Medical Institute, Rockefeller University, New York, NY, USA Search for more papers by this author Martine Cadene Martine Cadene Laboratory of Mass Spectrometry and Gaseous Ion Chemistry, Rockefeller University, New York, NY, USAPresent address: Centre de Biophysique Moléculaire, CNRS, rue C Sadron, 45071 Orléans Cedex 2, France Search for more papers by this author Brian T Chait Brian T Chait Laboratory of Mass Spectrometry and Gaseous Ion Chemistry, Rockefeller University, New York, NY, USA Search for more papers by this author Roderick MacKinnon Corresponding Author Roderick MacKinnon Laboratory of Molecular Neurobiology and Biophysics, Howard Hughes Medical Institute, Rockefeller University, New York, NY, USA Search for more papers by this author Author Information Motohiko Nishida1, Martine Cadene2, Brian T Chait2 and Roderick MacKinnon 1 1Laboratory of Molecular Neurobiology and Biophysics, Howard Hughes Medical Institute, Rockefeller University, New York, NY, USA 2Laboratory of Mass Spectrometry and Gaseous Ion Chemistry, Rockefeller University, New York, NY, USA *Corresponding author. Laboratory of Molecular Neurobiology and Biophysics, Howard Hughes Medical Institute, Rockefeller University, 1230 York Avenue, New York, NY 10065, USA. Tel.: +1 212 327 7288; Fax: +1 212 327 7289; E-mail: [email protected] The EMBO Journal (2007)26:4005-4015https://doi.org/10.1038/sj.emboj.7601828 PDFDownload PDF of article text and main figures. ToolsAdd to favoritesDownload CitationsTrack CitationsPermissions ShareFacebookTwitterLinked InMendeleyWechatReddit Figures & Info The Kir3.1 K+ channel participates in heart rate control and neuronal excitability through G-protein and lipid signaling pathways. Expression in Escherichia coli has been achieved by replacing three fourths of the transmembrane pore with the pore of a prokaryotic Kir channel, leaving the cytoplasmic pore and membrane interfacial regions of Kir3.1 origin. Two structures were determined at 2.2 Å. The selectivity filter is identical to the Streptomyces lividans K+ channel within error of measurement (r.m.s.d.<0.2 Å), suggesting that K+ selectivity requires extreme conservation of three-dimensional structure. Multiple K+ ions reside within the pore and help to explain voltage-dependent Mg2+ and polyamine blockade and strong rectification. Two constrictions, at the inner helix bundle and at the apex of the cytoplasmic pore, may function as gates: in one structure the apex is open and in the other, it is closed. Gating of the apex is mediated by rigid-body movements of the cytoplasmic pore subunits. Phosphatidylinositol 4,5-biphosphate-interacting residues suggest a possible mechanism by which the signaling lipid regulates the cytoplasmic pore. Introduction Inward rectifier K+ channels (Kir channels) comprise one family of K+ selective ion channels. Kir1 channels are important for electrolyte flow across kidney epithelial cells (Hebert et al, 2005). Kir2 channels control the resting membrane potential in many different cells and are important for electrical activity in muscle and neurons (Stanfield et al, 2002). In cardiac atrial cells, Kir3 channels, also known as GIRK channels, are responsible for slowing the heart rate when the vagus nerve is stimulated and for membrane potential maintenance in certain neurons (Stanfield et al, 2002). Kir6 channels, which exist as a complex with a second membrane protein called the sulfonylurea receptor, are regulated by the intracellular concentration of ATP (Aguilar-Bryan et al, 1995). In pancreatic beta cells, this form of regulation allows Kir6 channels to mediate insulin secretion (Ashcroft, 2006). These cellular functions underscore the medical importance of Kir channels. Familial diseases characterized by abnormal electrolyte processing by the kidney, epilepsy, cardiac arrhythmia and diabetes mellitus have their basis in abnormal function of Kir channels (Simon et al, 1996; Plaster et al, 2001; Hattersley and Ashcroft, 2005). Thus, Kir channels are potentially important targets for pharmaceutical agents. The name 'inward rectifier' stems from the fact that under physiological conditions, Kir channels exhibit higher conductance for K+ flowing into the cell (Lu, 2004). This is because Mg2+ and polyamines abundant inside cells block the pore when the electrochemical gradient favors the outward flow of K+ (Matsuda et al, 1987; Vandenberg, 1987; Lopatin et al, 1994). Consequently Kir channels operate near the resting membrane potential and tend to be silenced when voltage-dependent Na+ or Ca2+ channels depolarize the membrane. Kir channels, like other K+ channels, are tetramers of identical or similar subunits that surround a central ion conduction pathway. Each subunit contains two transmembrane α helices, a pore helix that crosses the membrane part way, and K+ channel signature sequence amino acids that form the selectivity filter (Doyle et al, 1998). The N- and C-termini, which are located on the intracellular side of the membrane, form a large 'cytoplasmic pore' structure: this is one of the characteristic features of the Kir family (Nishida and MacKinnon, 2002). Electrophysiological studies show that the cytoplasmic pore is important for at least two purposes. First, it extends the effective length of the pore. The extra long pore contains some of the acidic residues essential for blockage of the channel by Mg2+ ions and polyamines from the intracellular side and give rise to inward rectification (Taglialatela et al, 1994; Yang et al, 1995; Guo and Lu, 2003). Second, the cytoplasmic pore is the structural component through which gating of Kir channels can be modulated by regulatory proteins, ATP, Na+ ions or pH (Stanfield et al, 2002; Hebert et al, 2005; Ashcroft, 2006). Opening of Kir3 channels, for example, is stimulated by beta–gamma G-protein subunits (Logothetis et al, 1987; Reuveny et al, 1994; Wickman et al, 1994). Another prominent feature of Kir channels is their regulation by the signaling lipid phosphotidylinositol 4,5-bisphosphate (PIP2) (Hilgemann and Ball, 1996; Baukrowitz et al, 1998; Huang et al, 1998; Shyng and Nichols, 1998; Liou et al, 1999; Zhang et al, 1999; Lopes et al, 2002; Pegan et al, 2005). In Kir3 channels, there is a complex interplay between the effects on gating of beta–gamma G-protein subunits and PIP2: both appear to be important for channel opening through direct interactions with the ion channel (Huang et al, 1998). Recently, three crystallographic studies have provided information on Kir structures. The cytoplasmic pores of Kir3.1 and Kir2.1 have been described at 1.8 and 2.6 Å, respectively (Nishida and MacKinnon, 2002; Pegan et al, 2005), and the complete structure of a prokaryotic Kir from Burkholderia pseudomallei (KirBac1.1) has been described at 3.65 Å (Kuo et al, 2003). The cytoplasmic pore structures correspond to the eukaryotic channels that have been studied extensively for many years using electrophysiological methods, but they are detached from the transmembrane pore. The prokaryotic channel structure, although complete, is only 19% identical in amino-acid sequence to Kir3.1. In combination, these structures have provided templates for homology models for interpreting functional data on eukaryotic Kir channels (Antcliff et al, 2005). In this study, we have determined two structures at high resolution (2.2 Å) of a chimeric channel, whose transmembrane pore over the extracellular three-fourths of its length is of the prokaryotic Kir from Burkholderia xenovorans (KirBac1.3) (Durell and Guy, 2001) and the remainder, including the intracellular fourth of the transmembrane pore and the cytoplasmic pore, is from the mouse Kir3.1, which is 99% identical to human Kir3.1. The eukaryotic component encompasses the regulatory surfaces through which Kir3 channels are modulated by G-protein subunits and signaling lipids. Many disease-causing mutations map to these surfaces. Results and discussion Structure of the chimeric channel Figure 1A shows an amino-acid sequence alignment that includes four eukaryotic channels representing different subclasses of eukaryotic Kir channels, KirBac1.3 and a prokaryotic K+ channel from Streptomyces lividans (KcsA). We produced a chimeric channel by splicing Kir.3.1 and KirBac1.3 at the indicated junctions (Figure 1A and B). The N-terminus of KirBac1.3 was retained in order to achieve correct processing and membrane insertion using the Escherichia coli expression system. This N-terminus was then removed by thrombin cleavage before crystallization, whereas the N-terminal region of Kir3.1 was included in the final product from K41 in the Kir3.1 sequence. The transmembrane helix junction points were constructed sufficiently deep within the membrane to ensure that all of the cytoplasmic and membrane-surface exposed regions of the channel are of eukaryotic origin. In particular, the interfacial helix (lying parallel to the membrane plane, termed the slide helix in Kuo et al, 2003) and surrounding transmembrane helices are from Kir3.1. Numerous electrophysiological studies have shown that the eukaryotic components, colored blue in Figure 1B, are important for gating and regulation of Kir channels (Stanfield et al, 2002; Hebert et al, 2005; Ashcroft, 2006). Figure 1.(A) Sequence alignment of the chimera and K+ ion channels from mammals and prokaryotes. Abbreviations are as follows: Kir3.1: mouse Kir3.1, Kir1.1: human Kir1.1, Kir2.1: mouse Kir2.1, Kir6.2: mouse Kir6.2. Notation for secondary structures and numbering for the chimera above the sequences are from the published structure of the Kir3.1 cytoplasmic pore (Nishida and MacKinnon, 2002). The regions from Kir3.1 and KirBac1.3 in the chimeric channel are colored blue and red, respectively. Highly conserved residues are colored cyan. Signature sequence residues (140–147) and the G-loop residues (301–311) are enclosed in black boxes. (B) Overview of the chimeric channel. Only two subunits are shown for clarity. Cα atoms from Kir3.1 and KirBac1.3 are colored blue and red, respectively. The linker region between the N-terminus and the interfacial helix (dotted line) is disordered and not resolved. Boundaries of the lipid bilayer are drawn as yellow bars. (C) Stereo-view of the transmembrane pores of the chimera and KcsA. The chimera (red) and KcsA (black) are superposed. The interfacial helix of the chimera is omitted. Download figure Download PowerPoint Construction of the chimeric channel that expressed as a stable membrane protein was not straightforward and required many attempts (Supplementary Figure S1). This fact suggests that there are strict structural requirements, such as achieving the proper phase of the helix attachments. Moreover, we were unable to construct a similar chimera using the pore of the KcsA K+ channel, which is not a member of the Kir family. The strict constraints on establishing a 'correct' interface and the requirement of a Kir pore imply that the chimera probably replicates with good accuracy the basic structure of Kir3.1. The channel was expressed and purified as a stable tetramer in the detergent nonylglucoside. Crystallization at pH 6.2 in 120 mM KCl, 200 mM potassium phosphate and polyethylene glycol 4000 yielded crystals that diffracted X-rays to 2.2 Å Bragg spacings (Table I). The tetragonal crystal contained two unique subunits per asymmetric unit, allowing the structure determination of two unique four-fold symmetric chimeric channels, each revealing a different conformation of the cytoplasmic pore. The transmembrane pores are essentially identical to each other. One of these transmembrane pores is compared in Figure 1C with the corresponding region of KcsA. Table 1. Data and refinement statistics Data statistics Space group P4 Lattice constants (Å) a=b=98.42, c=92.62 Source Brookhaven X29 Resolution (Å) 100–2.2 Wavelength (Å) 1.1 Total/unique observations 163 094/43 991 I/sigma (I)a 17.0 (3.9) Redundancyb 3.7 (3.7) Completeness (%) 97.9 (99.7) Rsym (%)c 5.4 (30.9) Refinement statistics Resolution (Å) 29.5–2.2 Number of reflections 43 987 Number of atoms Protein 4662 Nonylglucoside 21 K+ ion 12 Water 226 R-factors (%)d Rwork/Rfree 23.1/25.6 (29.1/35.1) R.m.s.ds of bonds Length/angle 0.008 Å/1.28° R.m.s.ds, root mean-square deviations. a The number in parentheses is a statistic for the last resolution shell (2.3–2.2 Å). Same for redundancy, completeness, Rsym and R-factors. b Redundancy=total observations/unique observations. c Rsym=∑∣Ii–〈Ii〉∣/∑Ii, where 〈Ii〉 is the average intensity of symmetry equivalent reflections. d R-factor=∑∣F (obs)–F (cal)∣/∑F (obs). A total of 5% of the total reflections were used for Rfree calculation. Figure 2A shows one of the two channels in the crystal. A crystal soaked in RbCl was used to identify permeant ions in the conduction pathway (see Materials and methods). Four ion positions are observed in the selectivity filter, a fifth in the central cavity, and a sixth and seventh in between the transmembrane and cytoplasmic pores. Ion positions labeled 1 through 5 in Figure 2A correspond to ions observed in KcsA (Zhou et al, 2001). Ion positions labeled 6 and 7 are unique. Figure 2.(A) Conduction pore of the chimeric channel in the dilated conformation. A crystal was soaked in a RbCl-containing solution before data collection. The structure refinement and subsequent map calculation were carried out at 2.4 Å without waters and ions. Seven Rb+ ions (green spheres) were located on the Fo–Fc omit map contoured at 3.5 sigma (cyan meshes), on the crystallographic four-fold symmetry axis in the conduction pore. Two constriction sites along the pore (F181 side chain and residues 302–309 Cα atoms in the G-loop) are colored red. Two subunits have been removed from the tetramer for clarity. (B) Surface representation of the chimeric channel. The electrostatic potential of the surface was calculated using the program GRASP. The range of surface potentials is from −21.1 to +19.2 mV. Electropositive and electronegative surfaces are colored blue and red, respectively. Part of the channel has been removed to expose the cytoplasmic pore's inner surface to the viewer. Download figure Download PowerPoint The channel contains two relatively constricted regions along its length (Figure 2A, red). One of these constrictions corresponds to the inner helix bundle 'gate' (Doyle et al, 1998). Phenylalanine side chains completely occlude the pore at this point, suggesting that the inner helix bundle gate is closed. The closed gate is similar to that observed in KirBac1.1 (Kuo et al, 2003). The second constriction occurs at the apex of the cytoplasmic pore. It is formed by the 'G-loop' (Figure 1A), which has been shown to influence gating of Kir channels (Pegan et al, 2005, 2006). Figure 2B is colored according to the surface electrostatic potential. The cytoplasmic pore is electronegative inside, and therefore it should be attractive to cations such as K+, Mg2+ and polyamines. In contrast, the 'top' or membrane-facing surface of the cytoplasmic pore and interfacial helices are electropositive. The abundant positively charged arginine and lysine amino acids on these surfaces are well positioned to interact with the negatively charged phospholipid head groups of the cell membrane's inner leaflet. Structural conservation in the K+ selectivity filter Among the several K+ channel structures determined, KcsA has yielded the most detailed description at a resolution better than 2.0 Å (Zhou et al, 2001; Zhou and MacKinnon, 2003). The chimeric channel presented in this study at 2.2 Å represents a second high-resolution K+ channel structure (Figure 3A). Given that Kir channels and KcsA are far removed from each other on the K+ channel family tree, it is interesting to ask how highly conserved is the three-dimensional structure of the selectivity filter. The signature sequence amino acids, which form the first layer of atoms surrounding the K+ ions in the selectivity filter, are highly conserved in all K+ channels (Figure 1A). But there is significant variation in nearby amino acids, particularly those forming the intricate protein core surrounding the selectivity filter (sequence labeled 'pore helix' in Figure 1A, and structures shown in Figure 3B and C). Figure 3.(A) 2Fo–Fc map of the selectivity filter of the chimeric channel. K+ ions (green) and waters (red) are shown as spheres. Residues 143–148, K+ ions and water molecules were omitted during simulated-annealing refinement against the native data set and subsequent map calculation at 2.2 Å. The map is contoured at 1.3 sigma (cyan meshes). Only two subunits are shown for clarity. Numbering in panels A and B corresponds to the line above the sequences in Figure 1A. (B) Cross section through the selectivity filter of the chimeric channel. The selectivity filter in panel A is rotated by 90° about a horizontal axis in the plane and viewed from the extracellular side. Outer helix, pore helix and inner helix are colored gray. Side chains from the pore helix (red) and from other regions (blue) form a well-packed protein core around the selectivity filter. Residues labeled with an asterisk are from a neighboring subunit. (C) Cross section through the selectivity filter of KcsA. Same view as panel B. Download figure Download PowerPoint Figure 4A shows a superposition of the selectivity filter atoms from KcsA (the conductive structure) (Zhou et al, 2001) and the chimera. The deviations between these two structures are quantified in a graph of the absolute distance separating corresponding KcsA and chimera main chain atoms (Figure 4B). The blue dashed line in Figure 4B marks the average deviation (0.12 Å) for selectivity filter atoms observed in separate refinements of independent KcsA crystal structures, one with K+ and the other with Tl+ (Zhou et al, 2001; Zhou and MacKinnon, 2003). This value should serve as a reasonable estimate of the uncertainty with which selectivity filter atom positions are defined by data around 2.0-Å resolution. The comparison of KcsA and the chimera therefore seems to indicate that the three-dimensional structure of the selectivity filter is conserved to the limit of our ability to detect differences (0.1–0.2 Å). Figure 4.(A) Superposition of the chimera (red) and KcsA (black) selectivity filters. K+ ions in the selectivity filter are shown as spheres (green). (B) Atomic deviations between main chain atoms around the selectivity filter of the chimera and KcsA K+ channels. Deviations between main chain atoms (N, Cα, C, O) for amino acids corresponding to W67-Y82 in KcsA are shown (black). Rad(K)−rad(Na) is the difference in radius between K+ and Na+ ions (0.38 Å, red). Uncertainty is the average deviation for all atoms in from E71 to D80 observed in two KcsA crystal structures (0.12 Å, blue) (Zhou and MacKinnon, 2003). Download figure Download PowerPoint The precision with which selectivity filter atoms from the chimera and KcsA coincide is not a consequence of bias imposed by chemical terms in the refinement program. By refining the selectivity filter in the absence of Van der Waals radii restraint, significant effects on the mean atomic positions (i.e., greater than 0.2 Å) are not observed. Given the data resolution and quality, the atomic positions determined in this study are dominated by the experimentally measured X-ray intensities. Quantitative analysis of amino-acid sequence variation in K+ channels shows that the protein core surrounding the selectivity filter forms a highly coupled network of amino acids (Figure 3B and C) (Lockless et al, 2007). In other words, variation at one position is associated with a compensatory variation at other positions in the region. It seems probable that such constrained variation stems at least in part from the fact that the selectivity filter must adopt a very specific structure in order to carry out its catalytic function. Figure 4 shows that deviations of mean atomic positions in the selectivity filter are actually smaller than the amplitudes of thermal fluctuations expected to occur under normal operating temperatures. The deviations are also smaller than the difference in radius between K+ and Na+ ions (0.38 Å, red dashed line in Figure 4B). The fact that the KcsA and chimera crystals were both studied at liquid nitrogen temperature does not diminish the significance of the structural identity of the two selectivity filters: we expect temperature to affect the atomic fluctuations around the mean but not the mean positions of the atoms. In all likelihood, the striking structural conservation (of the mean atomic positions) is a requirement for selectivity filter function. Two conformations of the cytoplasmic pore Figure 5A shows a superposition of the two channels present in the crystal. The transmembrane pores are essentially identical, but the cytoplasmic pores adopt different conformations through rigid-body displacements of the subunits with respect to one another. In one conformation, the apex of the cytoplasmic pore is dilated, whereas in the other it is constricted (Figure 5B and C). The dilated conformation is sufficiently wide and exposes oxygen atoms (T306 and G307) on its surface, so that a mostly hydrated K+ should be able to pass through the pore at this point (Figure 5B). The constricted conformation is lined by methionine sulfur atoms (M308) and is too narrow to permit the passage of even a dehydrated K+ ion (Figure 5C). The G-loop (Figure 1A) (Pegan et al, 2006) encompasses the region of the cytoplasmic pore at which the dilation and contraction occurs (I301–T309). Figure 5.(A) Superposition of two chimeric channels within the same crystal. The cytoplasmic pore in one channel (blue) is dilated and the other (red) is constricted. Residues 302–309 in the G-loop are highlighted. (B) The apex of the dilated cytoplasmic pore. The cytoplasmic pore is viewed from the transmembrane side. Residues 306–309 in the G-loop are shown as a CPK model. Color code is blue for nitrogen, green for carbon, red for oxygen and yellow for sulfur. The regions of the cytoplasmic pore surrounding the apex are shown with a wire model. The scale bar is 10 Å. (C) Same view as in panel B for the cytoplasmic pore in the constricted conformation. Download figure Download PowerPoint Ultimately the biological significance of conformational differences observed in crystal structures has to be assessed through correlation with functional studies. Several published studies are relevant to the two conformations observed in the crystal. In Kir6.2 the mutation I296L results in a severe form of DEND syndrome, which is characterized by neonatal diabetes, developmental abnormalities, epilepsy and muscle weakness (Hattersley and Ashcroft, 2005). Electrophysiological studies showed that this mutation alters gating by increasing the open probability and reducing the ability of ATP to close the channel (Proks et al, 2005). The amino acid I296 in Kir6.2 corresponds to M308 in Kir3.1, which is the methionine residue that occludes the cytoplasmic pore when the G-loop constricts (Figure 5B and C). This location supports the conclusion of the Kir6.2 study, that the I296L mutation implicates a new region of Kir channels involved in gating. In Kir2.1 several mutations within the G-loop cause Andersen's syndrome, which is characterized by periodic paralysis, abnormal electrocardiogram and cardiac arrhythmias (G300V, V302M and E303K) (Lopes et al, 2002; Tristani-Firouzi et al, 2002; Bendahhou et al, 2003; Pegan et al, 2005). Structural studies of the Kir2.1 cytoplasmic pore, combined with electrophysiological studies of Kir2.1 led the authors to conclude that the G-loop may function as a gate (Pegan et al, 2005; Ma et al, 2007). In Kir3 channels, three independent electrophysiological studies identified the amino acid corresponding to L333 as being important for channel activation by beta–gamma G-protein subunits (He et al, 1999; Ivanina et al, 2003; Finley et al, 2004). In the crystal structure, L333 is located on the outer surface of the cytoplasmic pore at the interface between the subunits (Figure 6A, cyan sphere). This region undergoes a large conformational change when the channel switches between the two conformations observed in the crystal. If the binding of G-protein subunits was to be associated with such a conformational switch, then mutation of L333 would likely affect G-protein activation. Figure 6.(A) Stereo-view of the chimeric channel in the dilated conformation with PIP2-related mutations. All mutations that impair channel activation by PIP2 in published studies on the eukaryotic Kir family are mapped onto the chimera structure (see text). Green spheres mark residues buried beneath the protein surface, or that otherwise make close contact with residues on the protein surface. Red spheres show exposed residues on the protein surface and constitute four positively charged amino-acid clusters at the interfacial region, which are related to each other by the crystallographic four-fold symmetry. Cyan spheres mark L333 of Kir3.1, which is important for activation by G-protein subunits. (B) A positively charged amino-acid cluster and a bound detergent molecule. The figure is a close-up view of the interfacial region in panel A. Nonylglucoside (red) and its Fo–Fc omit map contoured at 2.5 sigma (cyan mesh) are shown. The map was calculated at 2.2 Å after the simulated-annealing refinement, with the detergent molecule omitted. Channel subunits and selected side chains near the detergent molecule are colored green and yellow. Residues 303–308 in the G-loop are colored cyan. Side chains colored white are known to alter activation by PIP2 when mutated (colored red or green in panel A). Among them, side chains of K188, K189, E192 and R219 were disordered and poorly defined in the electron-density map. Residues 67 and 68 on the N-terminal side of the interfacial helix (yellow) are omitted for clarity. Numbering corresponds to the line above the sequences in Figure 1A. Download figure Download PowerPoint In summary, the currently available functional data suggest that conformations similar to those described in this study may occur in the living cell. The two structures imply that gating of the G-loop is mediated by rigid-body movements of the cytoplasmic pore subunits. The inner helix bundle is closed in both structures. Further data will be necessary to understand whether gating of the G-loop is coupled to conformational changes at the inner helix bundle (Zhang et al, 2006). Amino acids mediating PIP2 activation Inward rectifier K+ channels also deserve the name lipid-regulated K+ channels. Signaling lipids, especially PIP2, produce activation of all members of this ion channel family in which lipid regulation has been studied, including the Kir1.1, Kir2.1, Kir4.1/5.1, Kir6.2 and Kir3 channels (Hilgemann et al, 2001). For channels in which an intracellular ligand regulates gating, for example beta–gamma G-protein subunits in Kir3 channels and ATP in Kir6.2, complex dual control by the cytoplasmic ligand and membrane lipid is observed (Baukrowitz et al, 1998; Huang et al, 1998; Shyng and Nichols, 1998). It has been difficult to quantify the absolute affinity and specificity of lipid interactions, because of the uncertainty involved in determining local concentrations of lipid molecules in the membrane. Nevertheless, the following facts have been established through electrophysiological studies. Depletion of PIP2 that occurs upon membrane patch excision results in loss of channel activity (Huang et al, 1998; Zeng et al, 2002; Schulze et al, 2003). Activity loss is accelerated by perfusion with anti-PIP2 antibodies and activity can be recovered by patch perfusion with PIP2-containing lipid vesicles (Huang et al, 1998; Zhang et al, 1999; Shyng et al, 2000; Zeng et al, 2002). Anionic lipids other than PIP2 also activate Kir6.2, and the effectiveness of a lipid tends to be proportional to the magnitude of negative charge on the head group (i.e., its valence) (Fan and Makielski, 1997; Krauter et al, 2001). Polycationic agents such as polylysine and neomycin diminish the ability of PIP2 to activate, presumably through electrostatic screening or direct interference, and mutation of specific lysine and arginine residues on the channel reduce PIP
