Healthy Research Rewards
ResearchHub is incentivizing healthy research behavior. At this time, first authors of open access papers are eligible for rewards. Visit the publications tab to view your eligible publications.
Got it
XX
Xiaodong Xu
Author with expertise in Catalytic Valorization of Lignin for Renewable Chemicals
Achievements
Cited Author
Key Stats
Upvotes received:
0
Publications:
10
(10% Open Access)
Cited by:
4,244
h-index:
30
/
i10-index:
42
Reputation
Biology
< 1%
Chemistry
< 1%
Economics
< 1%
Show more
How is this calculated?
Publications
0

Biomass Gasification in Supercritical Water

Michael Antal et al.Oct 14, 2000
Biomass feedstocks, including corn- and potato-starch gels, wood sawdust suspended in a cornstarch gel, and potato wastes, were delivered to three different tubular flow reactors by means of a "cement" pump. When rapidly heated to temperatures above 650 Â°C at pressures above the critical pressure of water (22 MPa), the organic content of these feedstocks vaporized. A packed bed of carbon within the reactor catalyzed the gasification of these organic vapors in the water; consequently, the water effluent of the reactor was clean. The gas was composed of hydrogen, carbon dioxide, methane, carbon monoxide, and traces of ethane. Its composition was strongly influenced by the peak temperature of the reactor and the condition of the reactor's wall. Extraordinary yields (>2 L/g) of gas with a high content of hydrogen (57 mol %) were realized at the highest temperatures employed in this work. Irrespective of the reactor geometry and method of heating, all three reactors plugged after 1−2 h of use with feedstocks that contained 15 wt % organic material. Lower loadings of organics lengthened the time before plugging occurred. The plug resulted from accumulations of ash and small amounts of char formed by coking reactions involving the biomass vapors. A method for removing plugs from the reactor was developed and employed during an 8-h gasification run involving potato wastes. Extensive corrosion of each reactor's inner wall occurred during these tests. Nickel and other metals were leached from the reactor and deposited in the carbon catalyst. Nickel alloy tubes are not suitable for use in this application.
0
Paper
Citation594
0
Save
0

Carbon-Catalyzed Gasification of Organic Feedstocks in Supercritical Water

Xiaodong Xu et al.Jan 1, 1996
Spruce wood charcoal, macadamia shell charcoal, coal activated carbon, and coconut shell activated carbon catalyze the gasification of organic compounds in supercritical water. Feedstocks studied in this paper include glycerol, glucose, cellobiose, whole biomass feedstocks (depithed bagasse liquid extract and sewage sludge), and representative Department of Defense (DoD) wastes (methanol, methyl ethyl ketone, ethylene glycol, acetic acid, and phenol). The effects of temperature, pressure, reactant concentration, weight hourly space velocity, and the type of catalyst on the gasification of glucose are reported. Complete conversion of glucose (22% by weight in water) to a hydrogen-rich synthesis gas was realized at a weight hourly space velocity (WHSV) of 22.2 h-1 in supercritical water at 600 Â°C, 34.5 MPa. Complete conversions of the whole biomass feeds were also achieved at the same temperature and pressure. The destruction efficiencies for the representative DoD wastes were also high. Deactivation of the carbon catalyst was observed after 4 h of operation without swirl in the entrance region of the reactor, but the carbon gasification efficiency remained near 100% for more than 6 h when a swirl generator was employed in the entrance of the reactor.
0
Paper
Citation401
0
Save
0

Bioinspired, Highly Adhesive, Nanostructured Polymeric Coatings for Superhydrophobic Fire-Extinguishing Thermal Insulation Foam

Zhewen Ma et al.Jun 25, 2021
Lightweight polymeric foam is highly attractive as thermal insulation materials for energy-saving buildings but is plagued by its inherent flammability. Fire-retardant coatings are suggested as an effective means to solve this problem. However, most of the existing fire-retardant coatings suffer from poor interfacial adhesion to polymeric foam during use. In nature, snails and tree frogs exhibit strong adhesion to a variety of surfaces by interfacial hydrogen-bonding and mechanical interlocking, respectively. Inspired by their adhesion mechanisms, we herein rationally design fire-retardant polymeric coatings with phase-separated micro/nanostructures via a facile radical copolymerization of hydroxyethyl acrylate (HEA) and sodium vinylsulfonate (VS). The resultant waterborne poly(VS-co-HEA) copolymers exhibit strong interfacial adhesion to rigid polyurethane (PU) foam and other substrates, better than most of the current adhesives because of the combination of interfacial hydrogen-bonding and mechanical interlocking. Besides a superhydrophobic feature, the poly(VS-co-HEA)-coated PU foam can self-extinguish a flame, exhibiting a desired V-0 rating during vertical burning and low heat and smoke release due to its high charring capability, which is superior to its previous counterparts. Moreover, the foam thermal insulation is well-preserved and agrees well with theoretical calculations. This work offers a facile biomimetic strategy for creating advanced adhesive fire-retardant polymeric coatings for many flammable substrates.
0

A novel epoxy resin composite coating containing polyaniline modified GO with triple anti-corrosion effects of barrier, passivation and corrosion inhibition

Dapeng Xu et al.Jun 3, 2024
Corrosion of metallic materials can have a detrimental impact on their performance, leading to a shortened service life of engineering equipment and posing risks to both people and the environment. This paper presents a novel epoxy resin (EP)-based composite coating (PFANI-GO/EP) that offers triple corrosion protection functions: barrier, passivation, and corrosion inhibition. Perfluorooctanoic acid-doped polyaniline modified graphene oxide (PFANI-GO) demonstrates superhydrophobicity, effectively enhancing the coating's barrier ability against corrosive substances. The combination of PANI and perfluorooctanoic acid (PFOA) in composite materials aids in the formation of a passivation film and hydrophobic layer, which prevent metal corrosion. After a 15-day immersion in brine, the PFANI-GO/EP coating demonstrates the highest impedance modulus of 1 Ã— 109 Î©Â·cm2 at 0.01 Hz, compared to pure EP coating, GO/EP coating, and PFANI/EP coating. Therefore, due to its corrosion resistance and prolonged corrosion aging time, PFANI-GO/EP coating shows promising potential for mitigating metal corrosion.